U.S. Particle Accelerator School
U.S. Particle Accelerator School
America's National School of Accelerator Science and Technology
Course Materials - The University of New Mexico - June 2019
Cryogenic Engineering
course given by Tom Peterson, SLAC and John Weisend, European Spallation Source
- Lecture 1 - Introduction
- Lecture 2 - Properties of Cryogenic Fluids
- Lecture 3 - Normal Cryogenic Fluid Behavior
- Lecture 4 - Cryogenic Properties of Materials
- Lecture 5 - Thermodynamics for Cryogenics
- Lecture 6 - Refrigeration & Liquefaction
- Lecture 7 - Thermal Insulation & Cryostat Basics
- Lecture 8 - Cryogenic Considerations for Cryomodule Design
- Lecture 9 - Magnet and RF Cavity Test Stand Design
- Lecture 10 - Superconductivity, Superconducting RF& Superconducting Magnets
- Lecture 11 - He II
- Lecture 12 - Cryogenic Distribution
- Lecture 13 - Magnet Current Leads
- Lecture 14 - Instrumentation
- Lecture 15 - Cryogenics for Superconducting Magnets
- Lecture 16 - Cryogenic Safety
- Lecture 17 - Cryogenic Equipment
- Lecture 17b - A Look at Some Cryogenic Equipment
- Lecture 18 - Cooling Below 1 K
- Lecture 19 - Cryocoolers
Homework Day 1
Homework Day 2
Homework Day 3
- Class Project
C5 39 Relief Calcs TJP
Simple Long Pipe Pressure Drop Analysis
Helium Properties
Helium Properties - 2 phase
ESS Guideline for Oxygen Deficiency Hazard (ODH)
- Class Project